SDSHobby
CHARGING MULTIPLE PARA BOARD FOR 2S-6S LI-PO, LI-FE, AND LI-ION BATTERIES
Weight | about 30g |
Size | L93mm* W50mm* H13mm |
Cell Count | 2~6S (7.4~22.2V) |
Balance Connector Type | TP/HP/XH/EH |
Specifications:, Note:, Can only be used to,
This is an all-in-one balance board adapter that allows you ...SDSHobby
NEW GT POWER 12PCS LED LIGHTS FOR RC CAR 100MA
Specifications:, Input Voltage:, 4.8-6V, Working Current:, 100mA, Dimension:, 47*30*12mm, Light Cable Length:, 35CM, Controller Cable Length:, 8CM, Power Wire Length:, 0CM, Weight:, 50g, Package Contents:,
LED Lights*12pcs n White LED Lights (5mm) X 6 pcs ...SDSHobby
GT POWER X-CHARGER AND DISCHARGER C6 WITH MAX. CHARGING 50W AND DISCHARGING 5W
Operating voltage range | 10.0~18.0V |
Max charging power | 50W |
Charge current range | 0.1~6A |
Discharge current range | 0.1~1.0A |
Current drain for balancing Lipo | 300mAh/cell |
NiCd/Ni-MH battery cell count | 1~15S |
Lithium battery cell count | 1~6S |
Pb battery voltage | 2~20V |
Specifications:, Max discharging power: 5W, Features:, It can monitor and balance individual cells of the lithium battery pack during the discharging process.,
It can accept three types of lithium battery-Lilo, Lipo and ...SDSHobby
GT POWER E6D LCD BALANCE CHARGER AND DISCHARGER OUTPUT MAX. 90W WITH AC-DC SWITCHING POWER SUPPLIER
Weight | 950g |
:, Maximum output power:, 50W (AC input), Maximum output power:, 90W ( DC input), Cells of NiCd/Ni-MH:, 15S, Cells of Lithium battery:, 6S, Features:,
Specifications Available to charge up to 15 cells of NiCd/Ni-MH ...SDSHobby
MINI SERVO SECTIONBOARD POWER BOX FOR GAS PLANE WITH 30A UBEC
Working voltage | 7-13V |
Steering current, voltage | 0-30A ,4.8-9 .7 V (factory voltage is 5.2V) |
Weight | 80g |
Volume | 116mm(long)*88mm(wide)*13mm(height) |
Working temperature | -20°C to 85°C. |
Specification:, Features:, , Integrated 30ABEC ( MXA: 40A ) using linear regulator makes the power pure, which can provide sufficient current to the actuator.,
Double power input to improve the stability of power supply, ...SDSHobby
MINI SERVO SECTIONBOARD POWER BOX FOR GAS PLANE WITH 20A UBEC
1.Working voltage | 7-13V |
.Steering current, voltage | 0-20A,4.8-9 .7 V (factory voltage is 5.2V) |
3.Weight | 80g |
4.Volume | 116mm(long)*88mm(wide)*13mm(height) |
5.Working temperature | -20°C to 85°C. |
Description:, The product is mainly used for the servo with large regular vane’s airplane, such as gasoline engine. This product can distribute several strings’ power. The sectionboard integrates CDI remote flameout swiches and reserves position for receiver, which make servo’s lines convenient and tidiness. If you use double powers input to the power supply, it will be more stable and more security., Technology Parameters:, Features:, 1. Eight channels for input, and sixteen channels for output.(every one channel input with two channels output ),
. Integrates CDI remote flameout switches. Through each channel of ...SDSHobby
MINI SERVO SECTION BOARD POWER BOX FOR GAS PLANE WITH KILL SWITCH
Working Voltage | 5V-8.4V |
Current | 0A-30A |
Weight | 70g |
Size | 116mm (L)*88mm (W)*13mm (H) |
Working Temperature | -20°C to 85°C. |
n Direct connection | When section board uses 5V-6V to supply power, then you can choose “direct connection”. |
Technology Parameters:, Produce Features:, Eight channels for input and sixteen channels for output (Every one channel input with two channels output), Receiver supplies power:, n Voltage drop 0.5V: When section board uses 6V and you don’t like the receive power too height, then you can choose “voltage drop 0.5V”., n Voltage drop 7805: When section board uses 7.2V- 8.4V high voltage to supply power, then you can choose “voltage drop 7805”.,
CDI Power Supply Indication :Green Light Continue Lighting: voltage above ...SDSHobby
SWITCHING POWER SUPPLY 12V/20A
Input voltage | AC100V-120V ;AC 200V-240V |
Output voltage | 12V |
Output current | 20A |
Output voltage adjustment range | ±10% |
Size | ~20 x 11 x 5cm (L*W*D) |
Color | as photo shown |
Description:, 12V 20A Switching Power Supply,
The Switching Power Supply has wide input voltage range, steady ...SDSHobby
CXK 5.8G WIRELESS MONITORING KIT (DVR AND PINHOLE CAMERA) WITH POWER SUPPLY AND RADIO CONTROL
Working Frequency | 5645-5945MHz |
Display Resolution Ratio | 640H*240V*RGB |
Display Screen Size | 2.4 inch |
Receiving Frequency | 5.8G; 8 channels |
Battery | 1500mAh; Standard rechargeable Li-po battery |
Dimension | 85*54*17mm |
Working Frequency | 5645-5945MHz |
Transmitting Output Power | 50mW (17dBm) |
Wireless Transmitting Distance | 400meters |
Image Pixel | 628*582 |
Video System | PAL/NTSC |
Camera Lens | pinhole lens |
Power Supply | 5V/200mA |
Dimension | 10.6*10.6*38mm |
Specifications:, , :, CM205:, : 55, Package Contents:,
DV01 S AV input; AV output Support 16GB TF card ...SDSHobby
CXK 5.8G WIRELESS MINI CMOS CAMERA WITH POWER SUPPLY 5645-5945MHZ
Working Frequency | 5645-5945MHz |
Transmitting distance | >100 meters |
Pixel | 628*582 |
Video System | PAL/NTSC |
Power Supply | 5V/200mA |
Angle of View | 55° |
Specification:, Package Contents:,
5.8G Wireless Mini CMOS Camera × 1 Power Supply x ...SDSHobby
CXK 5.8G 8 CHANNELS WIRELESS AV RECEIVER WITH ANTENNA (POWER NOT INCLUDED)
Receiving Frequency | 5645-5945MHz, 8 Channels |
Receiving Sensitivity | -90dBm |
Frequency Control | built-in frequency phase lock loop |
Two-way AV output | analog AV signal output directly |
Antenna Connector | SMA (internal pin) |
Power Supply Voltage | 6.5-15V |
Supply Current | 150mA |
Receiving Frequency | 5645-5945MHz, 8 Channels |
Receiving Sensitivity | -90dBm |
Frequency Control | built-in frequency phase lock loop |
Two-way AV output | analog AV signal output directly |
Antenna Connector | SMA (internal pin) |
Power Supply Voltage | 6.5-15V |
Supply Current | 150mA |
Specification:, , Package Contents:, , Specification:, , Package Contents:,
5.8G 8 Channels Wireless AV Receiver × 1 Antenna (power ...SDSHobby
EFUEL RC AC/DC 15V 4A ADAPTOR POWER
Input | AC 100-240V 50/60Hz 1.5A |
Output | DC 15V 4A |
Circuit power | 60W |
Specifications:,
LED indicator for power onSDSHobby
EFUEL RC MODEL AC 220V DC 6-15V 20A ADAPTOR POWER
Input Voltage | 220-240V AC (Part No. PSU20ADU, PSU20AU) |
Input AC Frequency | 50Hz/60Hz |
Output Voltage | 6-15V DC±0.5V |
Output Current | 20A±1A |
Current Overload Protection | ≤21A 500MS |
Input Fuse | 220V AC 3.15A Fuse |
LCD Display | Voltage Precision ±0.3V; Current Precision ±0.3A |
Output Voltage Ripple | L<100MV |
Power Efficiency | >80% |
Power Factor | >0.7 |
Over Temperature Protection | <100°C |
Cooling Method | Cooling Fan |
Operating Temperature | 0-40°C |
Operating Humidity | 0-90% |
Dimensions (L*W*H) | 184.5*92*50mm |
Net weight | 908g |
Features:, , Introduction:, , Kindly Remark:,
Specifications : Two 15 volts power outputs, up to 20 ...SDSHobby
8IN AV MONITOR FOR FPV AERIAL PHOTOGRAPHY/ IMAGE TRANSMISSION WITH LINT SUN-HOOD AND 12V POWER ADAPTER
Display Screen | 8-inch TFT LED 1152000 Pixels |
Dot Resolution | 800*480 |
Brightness | 450 |
Contrast Ratio | 500 |
Input Signals | Video, Audio |
Viewing Angle | 70 /70 degree, 50 /60 degree (L/R, U/D) |
Video signal amplitude | 0.7-1.4 |
Audio output | ≥250MW |
Colour system | PAL-4.43 NTSC-3.58 |
Power Consumption | ≤8W |
Operating Temperature | -20-55 centigrade |
Store Temperature | -30-65 centigrade |
Size | 208*146*34mm (L*W*D) |
Specifications:, Support PC frequency: H: 30-60KHZ V:60-75HZ, Input Voltage Range: DC: 6-16V, Package Details:, 1* AV line,
1* Sun hood 1* Power Adapter 1* Instruction Manual 1* ...SDSHobby
7IN LCD MONITOR FOR FPV AERIAL PHOTOGRAPHY WITH LINT SUN-HOOD AND 12V POWER ADAPTER
Display Screen | 7-inch TFT LCD LED backlight |
Dot Resolution | 800*480 pixels |
Brightness | 400-450cd/sq.m |
Contrast Ratio | 500 |
Viewing angle | 140 / 110degree (H/ V) |
Input Voltage | DC 7-12V (Red line) |
Power consumption | ≤8W |
Audio Output | ≤1W |
Size | 185.5*122*32.5mm (L*W*H) |
Weight | 450g |
Specifications:, Input signal: AV, Package Details:, 1* AV line,
1* Sun hood 1* Power Adapter 1* Instruction Manual 1* ...